HAUSSLER HM 70, Руководство по эксплуатации

Страница: 11 / 60

Setting up the device
⚠
CAUTION
Risk of crushing when setting up the mill
Injuries to limbs
 The device is heavy; take care during transport.
 Prior to lifting, check that the weight can be borne safely.

Prior to lifting the mill or any of its components, secure the load against crashing
down.

The device must always be set up on a stable surface.
i
Häussler runs in its mills prior to delivery. Due to vibrations during transport and
prevailing local conditions, the mill must be realigned on site.
i
When setting up the mill, take care to ensure that it is perpendicular and in true
alignment. You may need to use a spirit level to check this.
i
If you wish to use the mill with a sifting device, refer to page 42 of the assembly
instructions.

Insert the mains plug into the socket.

Switch on the main switch.
1.
Contact point of the stones
f  With the machine running, slowly turn
the adjusting wheel until the stones
make contact.
2
.
Align the millstone.
f

Turn the three adjusting bolts to align
the millstones until the grinding noise
stops.
f  Turn the adjusting wheel until a grinding
noise can be heard again.
f

Continue with the alignment process
until the grinding noise evens out.
11
Scope of supply