Hauslane Chef Series, Инструкция по эксплуатации и уходу, Страница: 9 / 28

6. LIGHT BULBS
Make sure power is switched off at service panel before carrying out any operation on the hood.
This range hood requires two UL approved halogen bulbs (JC type, 12 V, 20 W, G4-base), included.
To replace bulbs:
Take care not to damage the hood finish while using the screwdriver.
1. Carefully insert the blade of a small flat blade screwdriver between light cover and rim and
gently pry out light assembly.
In order to prevent the risk of personal injury, the halogen lamps must cool down
before removing them.
2. Remove light cover from light assembly and set aside.
3. Replace bulb with a new JC type, 12 V, 20 W Max, G4 base halogen bulb.
Do not touch replacement bulb with bare hands!
4. To reinstall the light cover, insert the 3 light cover tabs in the light assembly slots and gently push
until secured.
8
LIGHT ASSEMBLY SLOTS
HAUSLANE
267 Wattis Way, South San Francisco, CA 94080
Tel: 1-800-929-0168 Email: info@hauslane.com