Haus & Luft HL-OP-10, Руководство пользователя, Страница: 13 / 28

13
GB
PROPER DISPOSAL OF THE PRODUCT
(waste electrical and electronic equipment)
This symbol on the product indicates that the product, after its lifetime, should not be disposed with other
household wastes. To avoid harmful influence on the environment and human health due to uncontrolled
waste disposal, dispose the waste device to the service point of waste household appliances or report
collecting it from home. In order to obtain detailed information about the location and how to dispose
the waste electrical and electronic equipment in a safe way, contact your retailer or local Department
of Environmental Protection. Do not dispose the device with other municipal waste.
Poland
Integrated
fi
lter cartridge (3b)
: clean gently with a vacuum cleaner on both sides. Do
this very carefully and do not apply too much force, especially on the activated
fi
lter side,
otherwise the integrated
fi
lter cartridge will be damaged. The integrated
fi
lter cartridge is
a non-serviceable component. DO NOT separate the activated carbon
fi
lter from the HEPA
fi
lter, otherwise the entire cartridge will fail. Clean the integrated cartridge
fi
lter at least
once a month.
If the LED (4g) comes on when the air puri
fi
er is on, you need to replace the integrated
fi
lter cartridge with a new one. Replace the integrated
fi
lter cartridge. When done, press
and hold (4b) for at least 5 seconds. This will turn o
ff
the REPLACE FILTER LED. Replace the
integrated
fi
lter cartridge with a new one at least every 9 months, even if (4g) does not
come on (which may happen if the air puri
fi
er is not used too often).
CAUTION! Do not immerse the integrated filter cartridge (3b) in water!)
Once clean, reattach the pre
fi
lter to the Velcro pads on the integrate
d fi
lter cartridge.
3.
The maintenance of the UV-C lamp and ionizer unit (8) only requires periodic cleaning with
a dry cloth. Use a soft brush to dust o
ff
persistent grime. UV lamp should be replaced every
four years. The procedure for replacing the UV lamp should be meaking by an authorized
service center.
TECHNICAL SPECIFICATIONS
See the product’s nameplate for technical spec
ifi
cations.
Power cord length: 1.83 m
CAUTION! MPM agd S.A. may change the technical features of the product without notice.
HL-OP-10_instrukcja_v01.indd 13 13.04.2017 09:39:51