Tune your TV set to the output channel used by the DEC 1000-t (normally
Channel 38, but this channel can be changed).
When you turn on the DEC 1000-t, you should see the Initialising screen
on your TV set.
ii.
Connecting your DEC 1000-t to your TV through a VCR using RF cables
Plug one end of the supplied RF Loop-through cable into the RF
connector on the DEC 1000-t (as illustrated below). Plug the other end of
the RF cable into your VCR's RF-in socket. Another RF cable (not
supplied) will connect between your TV and VCR.
Tune your TV to the channel used by the VCR.
Tune your VCR to the output channel used by the DEC 1000-t (normally
Channel 38, but this channel can be changed).
When you turn on the DEC 1000-t, you should see the Initialisation screen
on your TV set.
- 16 -