iii.
If your TV connects via an RF cable to your VCR, and you have an available
SCART socket on your VCR, this connection method can also be used (as
illustrated below).
Set your VCR to AV input (SCART input) (see your VCRs documentation
for instructions).
Set your TV set to the channel being used by the VCR (see your VCRs
documentation for instructions).
When you turn on the DEC 1000-t, you should see the Initialising Screen
on your TV set.
4.3.2. Connecting the DEC 1000-t to your TV set via RF cable
If you cannot use the SCART connection, you can also connect the DEC 1000-t to
our TV with the supplied
RF Loop-through
cable.
When using the RF-Loop cable, the DEC 1000-t sends video over
Channel 38
. To
change the RF output channel on the DEC 1000-t, refer to Section 7.2 page 32.
There are three ways the RF Loop cable can be connected to your TV set.
Choose one of the following:
i.
Connecting the DEC 1000-t to your TV directly using RF cables
Connect one end of the supplied
RF Loop-through cable
to the
RF
connector
on the DEC 1000-t (as illustrated below). Connect the other
end of the RF-Loop cable to your TV set’s antenna connection (often
marked “RF input”).
- 15 -