Haulotte STAR 10, Книга по эксплуатации

Страница: 149 / 166

149 4000414930 E 10.15 USA / GB
STAR 8 - STAR 22J - STAR 10 - STAR 26J
E
- Trouble shooting and diagram
Trouble shooting and diagram
1 - Trouble shooting
1.1 - RECOMMENDATIONS
If a malfunction occurs, check the following points :
• Sufficient hydraulic oil in the tank.
• Batteries are charging.
• Control box E-stop push-buttons are pulled out.
• The control box selector key is set to platform or ground control box.
• Control box relays are engaged.
• Fuse status.
• Ground control box solenoid valve status.
If the malfunction persists, consult the troubleshooting table to identify the problem.
IF you cannot identify the problem, contact HAULOTTE Services®.
1.2 - DESCRIPTION
The FAILURES function describes the requirements relative to failures : monitoring, information
recording, information reading.
1.3 - REQUIREMENTS
N.B.-:- VAR[A
CTIVE
F
AILURE
] = 1
IF ONE OR MORE OF THE FOLLOWING FAILURES ARE IN ACTIVE STATE
Requirements Definition
FAIL_xx_001 An ACTIVE failure ( A ) signals that the failure is stive active
FAIL_xx_002 A DETECTED failure ( D ) signals the cause of the failure has been valid one at least power on, but is inactive
FAIL_xx_003
A code CODE is linked to failures which have several causes of activation to identify the one of activation (if
many conditions are active the code are added)
FAIL_xx_004
At power on, the failure log and failure counter are not changed for a failure which was already active at
power off
FAIL_xx_005 The failure log and failure counter are changed for a failure which internal code is changed