Haulotte STAR 10, Книга по эксплуатации

Страница: 139 / 166

139 4000414930 E 10.15 USA / GB
Mast
Inspection of the slack chain sensors
MS0062
Mast
Inspection of the slack chain sensors
1 - You will need
2 - Level of knowledge required
It is important that the person performing the work on the machine knows all the relative safety information contained
in the instruction manual.
3 - Safety instructions
• PPE (Personal Protective Equipment: glove, safety shoe,
glasses, etc…)
• Standard tool kit
• 2 slings 6 T - 3 m(9 ft10 in)
• Bridge crane 4000 kg(8,82 lb) (minimum)
• Place barriers around the perimeter of the work area
Exclusively use tools and auxiliary average adapted. Always wear necessary safety clothing.
Only an authorized and qualified technician can work on HAULOTTE® machines.
• The technician should take all steps to protect themselves or others against all risks of injury related to
this intervention.
• The technician should ensure they have the PPE (personal protective equipment) suitable for the job and
the particular conditions of environment in witch the material can be found (see safety information
specific to the operation site).
• Position the machine on a flat ground, stabilized and in a released environment.
• Mark out the work area.
• Cut the contact, to remove the key, open the battery cut if fitted.
• Place a "DO NOT USE" decal near the start/stop contactor (key switch) to inform personnel that
interventions are currently underway on the equipment.
• The pressure in the hydraulic system is very important. It can cause accidents. Relieve the pressure
before any intervention and never search for oil leaks using your hands.
• Attention to the risks of burns, the hydraulic system works at high temperatures.
• The exhaust fumes of the engines contain harmful products of combustion. Only start and run the engine
in a well ventilated Area. In a closed room, you must use a suitable system to evacuate the exhaust to
the outside.