Haulotte HT26RT O, Руководство по продукту и обучению

Страница: 99 / 280

A
B
C
D
E
F
G
H
I
99 4000611860 E 07.17 USA / EN
C
- Study of the wiring diagram
HT26RT O - HT28RTJ O - HT28 RTJ PRO - HT80RT O - HT85RTJ O - HT85RTJ PRO
2.5.6 - Boom
2.5.6.1 - Validation
REQUIREMENTS DEFINITION
BMV03
Raise (U: up) or descent (D: down) of boom is enabled if at least one of the cut-off conditions is active :
CUT-OFF U D GENERAL CUT-OFF CONDITIONS
1 General
1 1 1 Generator is running
2 1 1 Maximum number of running movements is reached
3 1 1
Change of fuel selection in progress for dual fuel
engine (Tier III dual fuel only)
4 1 1
Upper emergency stop pushed and overriding mode
not active
5 1 1 Safety valve ON test
REQUIREMENTS DEFINITION
BMV03
CUT-OFF U D
SIMULTANEOUS MOVEMENTS CUT-OFF
CONDITIONS
2
Simultaneous
movements
1..10 1 1
Requirements SM_CE_03 | SM_AU_02 |
SM_ANSI_02
REQUIREMENTS DEFINITION
BMV03
CUT-OFF U D OVERLOAD CUT-OFF CONDITIONS
3 Overload 1 1 1 Overload alarm is active and not overriding mode
REQUIREMENTS DEFINITION
BMV03
CUT-OFF U D TILT CUT-OFF CONDITIONS
4 Tilt
1 1 N/A
Extensible structure's movement tilt safety is active
and tilt is active and machine is unfolded
2 N/A 1
Extensible structure's movement tilt safety is active
and tilt is active and machine is unfolded and
boom's telescope is not retracted
REQUIREMENTS DEFINITION
BMV03
CUT-OFF U D REACH LIMIT CUT-OFF CONDITIONS
5 Reach limit 1 N/A 1
On dual load machine, if applied load is 350kg, the
boom is in P5