Haulotte HT26RT O, Руководство по продукту и обучению

Страница: 139 / 280

A
B
C
D
E
F
G
H
I
139 4000611860 E 07.17 USA / EN
E
- Adjustments
HT26RT O - HT28RTJ O - HT28 RTJ PRO - HT80RT O - HT85RTJ O - HT85RTJ PRO
F07.39
Fuel level
sensor
SL300
D
1
Open circuit on fuel level sensor (only for analog fuel level sensor type) :
--> SL300 > 500 ohms & CONFIG[FuelLevelSensorType] = Analog
2
Short circuit to ground on fuel level sensor (only for analog fuel level sensor type) :
--> SL300 =0 ohm & CONFIG[FuelLevelSensorType] = Analog
F07.40
Twilight sensor
SN900
D
1
Twilight sensor is out of range (Short circuit)
--> SN900>4.8V
2
Twilight sensor is out of range (Open circuit)
--> SN900<0.2V
FAILURES N DEC DESCRIPTION
SUPPLIES
F08.04
Calc. Input
Supply
U104 / U106
D
1
Detected ECU voltage difference
--> Difference between U106 (SPU) and U104 (basket B2)
2 Overvoltage of U106 (SPU) supply
4 Overvoltage of U104 (basket B2) supply
F08.05
Calc. Input
Supply
U106 5V regul
D
1
Failure on regulated 5 V output of U104 ECU (basket slave node) supplying the joysticks
--> 5 V output is measured out the range [4.5;5.5] V and 5 V output not failing
2
Failure on regulated 5 V output of U104 ECU (basket slave node) supplying the joysticks
--> Detected failure on 5 V output
4 Failure on regulated 5 V output of U106 ECU (SPU)
F08.07
Selector
incoherence
SA900T/SA900B
D
1 Both key’s signals are seen at ON which is electrically impossiblde SA900T=1 & SA900B=1
2
Both key’s signals are seen at OFF and the machine is power on which is electrically
impossible SA900T=0 & SA900B=0
F08.08
Unplugged
connector
Connectors/Fuses
D
1
Supplies’ input detected as unplugged on connectors : Check the CN1.B connectors for U106
ECU :
--> 12VD1<1.00V & 12VF1<1.00V
2
Supplies’ input detected as unplugged on connectors : Check the CN2.A connectors for U106
ECU :
--> 12VD2<1.00V & 12VF2<1.00V
4
Supplies’ input detected as unplugged on connectors : Check the CN2.B connectors for U106
ECU :
--> 12VD3<1.00V & 12VF3<1.00V
8
Supplies’ input detected as unplugged on connectors : Check the CN3.A connectors for U106
ECU :
--> 12VD4<1.00V
F08.11
Boom angle
electrical
SR520/SR521
D
1
Sensor SR520 of type 4/20 mA return a value < 3 mA => Open circuit or damaged electrical
circuit
2
Sensor SR520 of type 4/20 mA return a value > 22 mA => Open circuit or damaged electrical
circuit
4
Sensor SR521 of type 4/20 mA return a value< 3 mA => Open circuit or damaged electrical
circuit
8
Sensor SR521 of type 4/20 mA return a value > 22 mA => Open circuit or damaged electrical
circuit
FAILURES N DEC DESCRIPTION