Haulotte HT132RTJ PRO, Книга по эксплуатации

Страница: 83 / 144

83
4000392130 E03.16 USA / GB
Control-Lubrication
Cables
E016
Control-Lubrication
Cables
1 - You will need
Use only adapted tools and auxiliary resources.
Always wear the required protective clothing.
2 - Preliminary procedure
All disassembly operations, if possible, must only be performed on equipment that has been completely
deactivated and only by personnel with the necessary technical knowledge.
In addition to the safety precautions indicated in these instructions, follow all regulations concerning
safety and accident prevention that are generally applicable.
Every precaution must be taken before working on or near the machine.
After work has been completed, all casings and safety devices must be restored completely and
operational.
3 - Checking the cable transmission system
In order to ensure safe use of machinery, Haulotte Group recommends that you perform the following
inspections :
Daily inspection
• Place the machine on flat and firm ground.
• Power up the machine and select the console located on the turntable.
• Raise the boom to horizontal (For machines fitted with).
• Execute a complete extension/retraction cycle of the telescope assembly over approximately 2 m(6 ft7 in) or
a complete lifting/lowering cycle for mast-type machines.
• Check that the movement is synchronized and symmetrical, and that there are no abnormal sounds. If you
encounter a problem or suspect there may be a problem, carry out a more detailed inspection as described
below.
Regular inspection
This operation must be performed after the first 50 hours, then :
• STAR : Every 250 hours or 3 months.
• other machines : Every 250 hours or 6 months.
• Standard tool kit
• Protective goggles
• Gloves
• Place barriers around the perimeter of the
work area