Haulotte HT132RTJ PRO, Книга по эксплуатации

Страница: 79 / 144

79
4000392130 E03.16 USA / GB
Control-Lubrication
Chains
E016
Control-Lubrication
Chains
1 - You will need
Use only adapted tools and auxiliary resources.
Always wear the required protective clothing.
2 - Preliminary procedure
All disassembly operations, if possible, must only be performed on equipment that has been completely
deactivated and only by personnel with the necessary technical knowledge.
In addition to the safety precautions indicated in these instructions, follow all regulations concerning
safety and accident prevention that are generally applicable.
Every precaution must be taken before working on or near the machine.
After work has been completed, all casings and safety devices must be restored completely and
operational.
3 - Lubrication
Lubricant must be applied with a brush to the external chains at least every 250 hours or every 6
months. The frequency of application depends on surrounding conditions and conditions of use. The
frequency of application must ensure that a sufficient quantity of fluid oil is present in the chain links.
If the chain has been exposed to corrosive fluids, clean the chain immediately and apply lubricant.
N.B. -:-Telescoping operations may be necessary to access elements.
Before applying new lubricant, remove any foreign particles from the chain. Use recommended
lubricants Section B 1Recommendations-Lubrication diagram.
When cleaning chains, follow regulations concerning the environment.
• Standard tool kit
• Protective goggles
• Gloves
• Place barriers around the perimeter of the
work area
This procedure must be performed after the first 50 hours and then every 250 hours or every 6 months.