Haulotte HA120PX Скачать руководство пользователя страница 65

Страница: 65 / 94

4000327280

E09.16

USA / GB

HA120PX

- Operation instructions

5.4 -

TOWING

To tow a broken-down machine, disconnect the wheel drive hubs.

Perform this operation on flat ground with wheels chocked.

In the towing configuration, the machine braking system is inactive. Use of a drawbar is
recommended :

• Do not exceed the maximum freewheel speed (Refer to

Section B 4 Technical specifications).

• Do not exceed a grade of 25%.

5.4.1 - Disengaging the drive hubs

5.4.2 - Re-engaging the drive hubs

• To return machine to normal operation and braking, reverse the steps performed in disengaging the

drive hubs.

Screw the central nut up again to engage the internal gear.

Engage the driving gear slowly in case of resistance(By turning the wheels).

Screw the central nut up completely when the once the drive gear has commenced to
engage.

In the event of a machine breakdown, the machine can be towed a short distance to load it onto a transport

vehicle :

• Ensure that no one is in the platform during towing.

• Ensure boom is in the stowed position and the turntable is locked, prior to towing.

• The platform must be empty.

Unscrew the central nut ( 1 ) until the nut is at the limit.

When drive hubs are disengaged, the machine is in free wheel mode and the brake system no longer
functions.

Содержание HA120PX































































































Результаты поиска

Содержание HA120PX

Отзывы:

Похожие инструкции для HA120PX

Бренды по названию

Популярные бренды

Haulotte HA120PX, Руководство оператора

Результаты поиска

Содержание HA120PX

Отзывы:

Похожие инструкции для HA120PX

Бренды по названию

Популярные бренды