Haulotte HA120PX Скачать руководство пользователя страница 15

Страница: 15 / 94

4000327280

E09.16

USA / GB

HA120PX

- Foreword

2.1.5 - Explosion / Fire Hazards

2.1.6 - Crushing / Collision Hazards

• Always cordon off the area around the base of the machine to keep personnel and other equipment

away from the machine while in use.

• Warn personnel not to work, stand, or walk under a raised boom/platform.

• Do not drive in reverse direction (opposite the field of vision).

• Be aware of the boom position and tail swing when rotating the turret (turntable).

• Always ensure that the chassis is never driven any closer than 1 m (3 ft 3 in) to holes, bumps, slopes,

obstructions, debris and ground coverings that may hide holes and other dangers.

• Keep non-operating personnel at least 5 m (16 ft 5 in) away from the machine when driving and

slewing.

• Be aware of driving direction.

• When turret is slewed/rotated 180°, the platform is now facing the rear of the machine.

• Check the driving direction with the help of the red or green arrow on the chassis relative to the red and green

arrows on the platform control box.

• Also note that when changing the driving direction (Forward <> Reverse) the joysticks or switches must return

to the neutral position before reversing the drive direction and for movement to occur.

Always wear protective clothing and eye wear when working with
batteries and power sources/systems.

N.B.-:-Acid is neutralized with sodium bicarbonate and water.

• Do not start the engine if you smell or detect liquid propane gas (LPG),

gasoline, diesel fuel or other explosive substances.

• Do not work on or operate a machine in an explosive or flammable

atmosphere / environment.

• Do not touch hot components.

• Do not bridge the battery terminals with metallic objects.

• Do not service the battery in proximity of spark, open flame, lit cigarettes.

• Do not fill up the fuel tank, when the engine is running and/or near a

flame.

When in the platform :

• Check the work area for overhead clearance, for any obstacles besides

and below the platform when raising/lowering the platform and or before
driving.

• During movement, keep all the parts of the body inside the platform.

Hold onto the guardrails on the opposite side to any surrounding
structures. Take care to avoid trapping hands whilst holding the
guardrails.

• To position machine close to a building/structure, it is recommended

using the upper boom and or arms movement control functions to
position, rather than driving machine closer to structure.

Содержание HA120PX































































































Результаты поиска

Содержание HA120PX

Отзывы:

Похожие инструкции для HA120PX

Бренды по названию

Популярные бренды

Haulotte HA120PX, Руководство оператора

Результаты поиска

Содержание HA120PX

Отзывы:

Похожие инструкции для HA120PX

Бренды по названию

Популярные бренды