Haulotte HA100RTJ PRO, Книга по эксплуатации

Страница: 84 / 156

84 4000392150 E02.16 USA / GB
Control-Lubrication
Chains
E016
4 - Check the condition of the chains
To carry out the following operations, perform a complete telescoping.
• Check that the lifting chains and safety chains are clean.
• Check that there are no foreign particles on the chains and guide.
• Check that there are no signs of corrosion on chain elements.
Chains with any of the defects described below must be replaced.
• Check for elongation wear :
• Elongation of up to 2 %, over 12 segments, of the original chain length is permitted.
• Measure the value of (3) using an appropriate method. Compare with the value of *1 indicated in the table
below.
• Check for external wear on rollers and links :
• External wear must not measure more than 2 % from the section of the original link (2), see table above.
• Measure the value of (1) using an appropriate method.
• Check that no line or element is damaged or missing.
• Check that links are not distorted, deformed or broken.
Machine Link width (2) Length of 12 links (4)
Star 6 - 8 - 10
HA32RTJ PRO - HA41RTJ PRO
H28TJ+ - HT43RTJ PRO
11.5 mm 152.40 mm
Star 8 - 10 14.50 mm 190.50 mm
HTL 4014 - HTL 4017 - HTL 3614 - HTL 3617 24 mm 304.80 mm