Haulotte Group Quick Up 11, Инструкция по эксплуатации и обслуживанию

Страница: 39 / 52

Operation and maintenance
27
Caution!
Caution!
Caution!
Caution!
5 -
MAINTENANCE
5.1 - GENERAL RECOMMENDATIONS
Before any intervention on the
machine, position it on a firm,
horizontal floor, fold it completely,
disconnect electric power and
depressurise the hydraulic circuit.
The maintenance operations indicated in this manual are given for normal
operating conditions.
In difficult co nditions: ex treme t emperatures, hig h hygrometry, po lluted
atmosphere, high altitude, etc., certain operations should be carried out
more frequently and specific precautions may be necessary. Consult th e
manufacturer’s or distributor’s Aftersales service for more information.
Any technical intervention must be
performed by a HAULOTTE service
technician or an approved
HAULOTTE agent.
Only approved, skilled technicians may intervene on the machine. They
must comply with the safety instructions co ncerning per sonnel an d
environmental protection.
Check correct operation of the safety systems before use.
Never work underneath a lifted
platform without first securing it
with wedges or overhead slings.
Caution!
Before straightening an overturned
machine, make sure it has not
suffered any damage that could
prevent it from standing correctly
on its wheels in the vertical
position. Use a crane, lift truck or
other machine and gradually bring
the Quick Up back to the vertical
position.
IMPORTANT: For any repair operation, use manufacturer certified
original parts. Any non compliance with this rule may incur serious
safety and stability risks for the machine.
IMPORTANT: For major maintenance operations requiring
dismounting of one or more of the machine’s components, contact
the manufacturer for specific recommendations to avoid any
dangerous situations.
After dismounting a component affecting the lifting structure, static
and dynamic tests must be performed before putting the machine
back into operation (see Chap. 1.4.2, page 5).
Do not use the machine as a
welding earth -
do not weld without disconnecting
the (+) and (-) terminals of the
batteries -
Do not start other vehicles with the
batteries connected.