Haulotte Group Quick Up 11, Инструкция по эксплуатации и обслуживанию

Страница: 29 / 52

Operation and maintenance
17
Caution!
Caution!
Caution!
4 -
USE
4.1 - UNLOADING - LOADING - MOVING
Incorrect manoeuvres can cause
the machine to fall, causing very
serious injuries and material
damage.
Before any manipulation:
- check that the machine is in good condition and that it was not
damaged during transport. If damage is observed, make any reserves
to the transport company,
- check that no tools or debris are in the platform,
- make sure that the platform is fully folded and that the stablisers are
retracted.
Before making any movements,
make sure there are no obstacles
that may hinder manoeuvres.
Caution!
No operators should be inside the
platform during the various
manoeuvres.
4.1.1 - Manual loading
Carry out load ing operations on a stable, flat and clear surface th at is
sufficiently resistant.
NOTE: For battery machines, place the battery in the basket and se-
cure with straps during transport.
• Release the loading pivot blocking pin.
Make sure that the truck floor is able
to bear the weight of the Quick Up.
• Lower the loading pivot until it comes into contact with the floor of the
transport vehicle. Remember to put the blocking pin into place before
manoeuvring the QUICK UP.