Haulotte Group HA120PX, Книга по эксплуатации

Страница: 46 / 116

46 4000599070 E11.16 USA / GB
HA120PX
C
- Maintenance
7.3.3 - Hydraulics
7.3.3.1 - Oil replacement
Replace oil after each major intervention, and each time an anomaly has been detected.
Take an oil sample each year, check the viscosity, ensure there are no foreign bodies and
change if necessary. Systematically change the oil in the hydraulic circuit every 2 years.
• Only use oils that that match the technical characteristics that correspond to HAULOTTE®
recommendations ( Section B 1 - Lubrication diagram - List of ingredients) or
contact HAULOTTE Services®.
• Do not mix two oils with different characteristics : If necessary, drain and clean the whole system.
• Check the cleanliness of the oil filter cartridge (no metal shavings, rubber, plastic, …) : If necessary,
drain and clean the whole system.
• Respect the following step during filling :
• The machine must be completely stowed (For machines fitted with : Stabilisers raised).
• Fill the tank.
• 1 : Perform a complete cycle (fully extend and retract) of each cylinder.
• 2 : Fill the tank if necessary(Never above of the maximum level).
• Repeat the step ( 1 ) and ( 2 ) for each cylinder on the machine.