Haulotte Group HA120PX Скачать руководство пользователя страница 13

Страница: 13 / 116

4000599070

E11.16

USA / GB

HA120PX

- Safety precautions

4 - Instructions for intervention

N.B.

-:-Acid is neutralized with sodium bicarbonate and water.

Do not use the machine during while maintenance work is being completed on it.

For any intervention on the power sources, wear glasses and protective clothes (acid spray).

Do not operate the product in the following situations :

• Do not work in an explosive or flammable atmosphere (spark, flame, etc.).

• Do not touch the hot parts of the hydraulic power source (engine, filters, etc.).

• Do not bridge the battery terminals with metallic objects.

• Do not service the battery in proximity of spark, open flame, lit cigarettes.

• Never expose the batteries or electrical components to water (pressure cleaner, rain).

• Never disable the safety devices.

• Do not climb onto the covers.

• Do not fill up the fuel tank, when the engine is running and/or near a flame.

Use an oil collection pan to avoid polluting the environment.

Содержание HA120PX





















































































































Результаты поиска

Содержание HA120PX

Отзывы:

Похожие инструкции для HA120PX

Бренды по названию

Популярные бренды

Haulotte Group HA120PX, Книга по эксплуатации

Результаты поиска

Содержание HA120PX

Отзывы:

Похожие инструкции для HA120PX

Бренды по названию

Популярные бренды