Haug Static Control Digital, Руководство по эксплуатации

Страница: 14 / 20

8 Maintenance
14
8 Maintenance
Replacing the block battery
NOTE:
Do not dispose of batteries with the
household garbage (see page 18: ”Disposal
of batteries”).
Cleaning the SCD
1. Open the battery compartment lid at
the rear of the SCD.
2. Remove the block battery from the
compartment and separate from the
connection clip.
3. Connect a new block battery to the
connection clip, and insert battery
into compartment.
4. Reattach the lid to close the battery
compartment.
1. Moisten a dust- and lint-free cloth with
our special cleaning agent SRM1 or
with medical-grade alcohol.
2. Clean the spacer pins and sensor
plate using the moistened cloth.
3. Allow the SCD to dry before
performing a measurement.
Fig. 2
Fig. 3
NOTE:
Reliable measuring values will not be
provided unless the cleaning agent has
evaporated completely.