Haug 01.7912.005, Руководство по эксплуатации

Страница: 12 / 24

4 Install
12
8. If necessary, connect the
signal line to the signal
socket.
• The discharging power
pack can be cycled via
the signal socket.
Configuration of the signal
socket:
A External control voltage
or
B External clock switch
Pin 1 External control
voltage (square
wave signal, 1 kHz,
10 V, positive)
Pin 2 0 V
Pin 3 not used
Pin 4 not used
Pin 5 Clock switch connection
Pin 6 Clock switch connection
PE Shield Ground/signal ground
NOTE:
The discharging power pack only supplies voltage if the signal line
is connected or the jumper plug is screwed on.
In order to avoid a malfunction while the signal line is connected,
only one time-relay control unit may be connected. Either connect
the external control voltage or the external clock switch.
9. The discharging power pack is ready for operation.