Hauck Denver 6, Инструкция

Страница: 10 / 24

10
Instructions for use
Scope of supply (fi g. 1)
- Chassis with pushchair superstructure
- Snug nest
- Leg cover
1. Assembly
Release the transport safeguard. Erect the pushchair by moving the slide until
you can see and hear that
the locking mechanisms on both sides have engaged.
2. Mounting the wheels (fi g. 2)
Fit a wheel on the front axle until you hear it click and the metal clip has
engaged in the axle groove. Check that it fi ts fi rmly. Push the axle through the
two plastic guides at the ends of the frame and fi t the other wheel. Here again,
check that it fi ts fi rmly. Proceed accordingly with the rear axle.
3. Brakes
To lock the foot brake, press the brake bar down with your foot. To release it
again, lift the brake bar with your foot.
Caution! Always lock the brakes when parking the pushchair.
4. Mounting the hood (fi g. 3)
Push the hood in the corresponding openings to the left and right of the
pushchair superstructure.
5. Swivelling the push bar (fi g. 4a, 4b, 4c, 4d)
The push bar can be swivelled to use the pushchair with snug nest. To do so,
pull the upper adjusting lever on the push bar and move it over to the other
side at the same time. Check that it has engaged correctly.
6. Adjusting the height of the push bar (fi g. 5)
Press the adjusting buttons underneath the handle on both sides and adjust
the required height. After adjusting the required height, the buttons pop out
again.