background image

Important notes on safe operation of the engine

– Stop the engine before performing any maintenance, cleaning- and repair work.

– Stop the engine before refuelling.

Never refuel near a naked flame or sparks which could start a fire. Don’t smoke. Don’t spill fuel.

– Keep explosive materials as well as flammable materials away from the engine because the exhaust

gets very hot during operation.

– Wear close-fitting clothing when working on the engine while it is running.

Please don’t wear necklaces, bracelets or any other things which you could get caught with.

– Please pay attention to all advice- and warning stickers placed on the engine and keep them in legi-

ble condition. Contact your next 

HATZ service station

, if a sticker comes off or is illegible and ask

for a new one.

– Note that any unauthorized modifications to the engine absolve its manufacturer from liability for

the consequences.

Regular servicing in accordance with the details provided in this Instruction Book is essential to keep
the engine operating reliably.
In case of doubt, always consult your nearest 

HATZ service station

before starting the engine.

4

Содержание 2 - 4 L 41
















































Отзывы: