- 16 -
F-1
SEX
1-MAN
0-WOMAN
F-2
AGE
10-99
F-3
HEIGHT
100-220
F-4
WEIGHT
20-150
F-5
FAT
≤19
Thin
20—25
Fit
25—29
Overweight
≥30
Obesity
f.
Power saving
：
When the power is on, if the machine doesn’t work for 10 minutes, it will sleep and
the screen will be off. Press any key to wake up the machine.
11
、
Maintenance
Maintain the machine
Proper maintenance can always keep the machine in good condition.
1. Do not use sand paper or solvent to clean the machine.
2. Controlling parts can not be exposed in the sun or humid environment.
3. Check and tighten all parts regularly. Replace broken parts immediately.
Adjust the running belt
The running belt is well adjusted before being packed. After a period of use, the
running belt may loosen or deflect, which is normal. Then it is necessary to adjust the
running belt, otherwise there will be friction damage to the running belt.
1. Tension:
a)
Keep the machine at the speed of 3km/h.
b)
Put the multi-wrench into the left adjusting screw and turn clockwise by 1/4
circle.
c)
Put the multi-wrench into the right adjusting screw and turn clockwise by 1/4
circle.
d)
If necessary, repeat Step b and c as above until the running belt runs smoothly.
Note:
These four steps are available to tighten the running belt, if you need to loosen
it, please turn anti-clockwise.
2. Deflection:
a)
Keep the machine at the speed of 6km/h.
b)
If the running belt deflect to the left, put the multi-wrench into the left adjusting
screw and turn clockwise by 1/4 circle or put the multi-wrench into the right
adjusting screw and turn anti-clockwise by 1/4 circle. (Diagram 1)
c)
If the running belt deflect to the right, put the multi-wrench into the right
adjusting screw and turn clockwise by 1/4 circle or put the multi-wrench into the
left adjusting screw and turn anti-clockwise by 1/4 circle. (Diagram 2)
