The mat/deck friction may play a major role in the function and life of your treadmill and that is
why we recommend you constantly lubricate this friction point to prolong the useful life of your
treadmill.
You should apply the lubrication after approximately the first 20 hours of operation.
We recommend lubrication of the deck every 30 days.
See below procedures for lubricating:
1)
Use a soft, dry cloth to wipe the area between the belt and deck.
2)
Spread lubricant onto the inside surface of belt and deck evenly (make sure the machine is
turned off and power is disconnected).
3)
Periodically lubricate the front and rear rollers to keep them at there peak performance. If the
treadmill belt/deck/roller is kept reasonably clean it is possible to expect over 1200 hours
before additional re-lubing is necessary.
How to check the running mat for proper lubrication:
1.
Disconnect the main power supply.
2.
Fold the treadmill up into the storage position.
3.
Feel the back surface of the running mat.
If the surface is slick when touched, then no further lubrication is needed.
If the surface is dry to the touch, apply a suitable silicone lubricant.
We recommend you use a silicone based spray to lubricate your Treadmill. This can be purchased
from your local sports Retailer or a local hardware store.
Identification ways for the degree of tightness of running belt and poly V-belt.
When the running belt skips, please follow the steps as follows to make sure which belt
needs to be adjusted, running belt or poly V-belt.
a)
Cut off power, screw off the bolt on cover of protection. Then take down the protecting cover
from the treadmill
b)
Turn the speed to be around 3km/h, step on the running belt by pressure and try your best to
make the running belt stop. If running belt stops, together with the front roll, but the motor still
runs, under this condition, it means the poly V-belt needs to be adjusted.
c)
Turn the speed to be around 3km/h, step on the running belt by pressure and try your best to
Содержание RB-4000 M
Страница 1: ...1 HATTRICK RB 4000 M MOTORIZED TREADMILL OPERATING INSTRUCTIONS MANUAL ...
Страница 21: ...21 EXPLODED DRAWING ...
Страница 24: ......