hattrick RB-4000 M, Руководство по эксплуатации

Страница: 16 / 24

WARNING: STOP TREADMILL BEFORE FOLDING.
Maintenance and servicing
AFTER EACH USE (DAILY)
Clean and inspect, following these steps:
1) Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.
2) Wipe down the running belt, deck, motor cover, and console casing with a damp cloth.
Never use solvents, as they can cause damage to the treadmill.
3) Inspect the power cord.
4) Make sure the power cord is not underneath the treadmill or in any other area where it can
become pinched or cut.
5) Check the tension and alignment of the running belt. Make sure that the treadmill belt will
not damage any other components on the treadmill by being misaligned.
EVERY WEEK
Clean underneath the treadmill, following these steps:
1) Turn off the treadmill with the star/stop switch, then unplug the power cord at the wall
outlet.
2) Fold the treadmill into the upright position, making sure that the lock latch is secure.
3) Move the treadmill to a remote location.
4) Wipe or vacuum any dust particles or other objects that may have accumulated underneath
the treadmill.
5) Return the treadmill to its previous position.
EVERY MONTH -IMPORTANT!
1) Inspect all assembly bolts of the machine for proper tightness.
2) Turn off the treadmill with the start/stop switch, then unplug the power cord and wait 60
seconds.
3) Remove the motor cover. Wait until ALL LCD lights turn off.
4) Clean the motor and lower board area to eliminate any lint or dust particles that may have
accumulated. Failure to do so may result in premature failure of key electrical components.
EVERY 6 MONTHS