Hatteland HT C01 Series, Руководство пользователя

Страница: 18 / 52

18
IND100210-2
INB100042-2 (Rev 14)
General Installation Recommendations
Installation
PCI Card removal / replacement - Introduction
Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL
cables from the computer unit before proceeding!
1: Unscrew 4 screws on each side of the bracket.
Turn anti-clockwise using a Pozidriv #2 screwdriver.
2: Push each side of the bracket, one forward and one
backwards in a 45 degree rotation clockwise to slide it out
of the tracks. Then lift up the the bracket to remove it.
PCI Card removal / replacement - Full Lenght & Full Height
Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL
cables from the computer unit before proceeding!
1: Unscrew 1 screw to loosen the PCI card bracket from
the cabinet. Turn anti-clockwise using a Pozidriv #2
screwdriver.
2: Remove or insert the desired PCI card into the slot.
Make sure you do not force the card down, it should be
mounted with a firm grip with two hands and performed in
a straight up or downwards motion.
Repeat the procedure backwards to finalize operation.