Hatteland HT C01 Series, Руководство пользователя

Страница: 15 / 52

15
IND100210-1
INB100042-2 (Rev 14)
General Installation Recommendations
Installation
Ferrites
On selected products, the ferrites prevent high frequency
electrical noise (radio frequency interference) from exiting or entering
the equipment. To verify if your product require this, please see the
“Physical Overview” chapter in this manual. The ferrites are part of
the contents of the package also specified in the “Contents Of
Package” chapter early in this manual. The ferrites must be
mounted on specific cables to fully comply with the Type
Approvals!
The ferrites should be mounted (clipped in place on the cable as
shown in illustration) as close as possible to the cable connector
on the rear side of the computer product. Open up the ferrite,
place the cable inside as shown in FIG1, and then gently close it
until a click can be heard (FIG2).
FIG1
To computer
FIG2
To computer