HATO 300 SILENT 1000N, Руководство по эксплуатации

Страница: 14 / 29

5. SETTING THE AUTOMATIC CLOSURE CONDITIONS
a) Press and hold SET button until display shows "1", then press UP
button until display shows "5.
b) Press the SET button. The device is now in the auto-closing condition
setting mode. The display will show the number "1" with a dot blinking.
c) Press UP / DOWN button once to set auto close mode. You can select
"1" or "2".
The number "1" means that the door can close automatically when it
is in the fully open position.
The number "2" means that the door can automatically close when
the door is in any position.
d) Press the SET button to confirm the setting, then the drive will return to
standby automatically and display "ll".
ATTENTION!
1. The condition for closing is set to "1" at the factory.
2. The door closes automatically only when opened, and shall not
close automatically when stopped while closing.
14