Symptom
Probable Cause
Corrective Action
Unit not hot enough.
Infinite switch set too low.
adjust infinite switch to a higher setting.
Heating element not working.
Contact authorized Service agent or Hatco for
assistance.
Infinite switch not working properly.
Contact authorized Service agent or Hatco for
assistance.
Low water level in well.
Fill each well with hot tap water until the water is
between 1/2″ (13 mm) and 1″ (25 mm) deep.
Voltage supplied is incorrect.
Verify correct voltage is supplied to unit. Low supply
voltage will cause improper heating.
Unit too hot.
Infinite switch set too high.
adjust infinite switch to a lower setting.
Infinite switch not working properly.
Contact authorized Service agent or Hatco for
assistance.
No water in well.
Fill each well with hot tap water until the water is
between 1/2″ (13 mm) and 1″ (25 mm) deep.
Voltage supplied is incorrect.
Verify correct voltage is supplied to unit. High supply
voltage will cause unit to overheat and my damage
the unit.
No heat.
Unit not turned on.
Turn on unit.
Circuit breaker tripped.
Reset circuit breaker. If circuit breaker continues to
trip, contact authorized Service agent or Hatco for
assistance.
Infinite switch not working properly.
Contact authorized Service agent or Hatco for
assistance.
Heating element not working.
Contact authorized Service agent or Hatco for
assistance.
Form No. SWm-0914
9
TROUBLESHOOTING GUIDE
English
Troubleshooting Questions?
If you continue to have problems resolving an issue, please
contact the nearest authorized Hatco Service agency or Hatco
for assistance. To locate the nearest Service agency, log onto
the Hatco website at
www.hatcocorp.com
and click on
Find Service agent, or contact the
Hatco Parts and Service
Team
at:
Telephone: 800-558-0607 or 414-671-6350
e-mail:
Fax:
800-690-2966 or 414-671-3976
This unit must be serviced by qualified personnel only.
Service by unqualified personnel may lead to electric
shock or burn.
WARNING
ELECTRIC SHOCK HAzARD: Turn OFF infinite switch,
unplug power cord, and allow unit to cool before
performing any cleaning, adjustments, or maintenance.
WARNING
Содержание SW series
Страница 22: ...22 Form No SWm 0914 NOTES English...
Страница 23: ...Form No SWm 0914 23 NOTES English...