Hatco HBG-2418, Инструкция по установке и эксплуатации

Страница: 8 / 16

HBGB Countertop Cutout Chart
Model Width Depth
HBGB-2418 24-5/8″ (625 mm) — 24-7/8″ (632 mm)
18-5/8″ (473 mm) — 18-7/8″ (479 mm)
HBGB-3018 30-5/8″ (778 mm) — 30-7/8″ (784 mm)
18-5/8″ (473 mm) — 18-7/8″ (479 mm)
HBGB-3618 36-5/8″ (930 mm) — 36-7/8″ (936 mm)
18-5/8″ (473 mm) — 18-7/8″ (479 mm)
HBGB-4818 48-5/8″ (1235 mm) — 48-7/8″ (1241 mm)
18-5/8″ (473 mm) — 18-7/8″ (479 mm)
HBGB-6018 60-5/8″ (1540 mm) — 60-7/8″ (1546 mm)
18-5/8″ (473 mm) — 18-7/8″ (479 mm)
HBGB-7218 72-5/8″ (1845 mm) — 72-7/8″ (1851 mm)
18-5/8″ (473 mm) — 18-7/8″ (479 mm)
INSTALLATION
8
Form No. HBGm-1111
Trim Mounting Ring
Metallic
Countertop
Apply a bead of NSF-approved
sealant between the metallic
countertop and trim mounting ring.
Sealant must be rated for use at
a minimum temperature of
250°F (121°C).
Figure 8. HBGB Built-In Installation
Do not modify wiring or cut thermostat capillary on control
box to increase-remote mounting distance. Cutting the
thermostat capillary will cause the unit to overheat and
may damage the unit as well as the surrounding
countertop.
NOTE: The remote-mounted control box should be mounted
using screws with a 1/4″ (6 mm) minimum diameter
screw head inserted through the keyholes located on
the mounting brackets. The control box is to be readily
removable, not permanently mounted.
NOTICE
8. Once all components are secured, proceed to the
OPERaTION section.
NOTE: A 6′ (1829 mm) cord is supplied with this unit. Excess
cord should be routed neatly so it does not hang down.
Do NOT cut cord, any modification to the cord voids
warranty.