Symptom
Probable Cause
Corrective Action
Unit too hot.
Temperature control set too high.
adjust temperature control to a lower setting.
Temperature control stuck in the HIGH position. Contact authorized Service agent or Hatco for
assistance.
Unit plugged into an incorrect power supply.
Verify with qualified personnel that power supply
matches unit specification.
Unit not hot enough.
Temperature control set too low.
adjust temperature control to a higher setting.
Location of unit is susceptible to air currents (air
conditioning ducts or exhaust fans).
Block air currents or relocate unit.
Unit not working at all.
Unit not plugged in.
Plug unit into proper power supply.
Unit not turned on.
move Power ON/OFF (I/O) switch to the ON (I)
position.
Power ON/OFF (I/O) switch is not functioning.
Contact authorized Service agent or Hatco for
assistance.
Heating element is burned out.
Contact authorized Service agent or Hatco for
assistance.
Temperature control is defective.
Contact authorized Service agent or Hatco for
assistance.
This unit must be serviced by qualified personnel only.
Service by unqualified personnel may lead to electric
shock or burn.
WARNING
ELECTRIC SHOCK HAzARD: Turn OFF power switch,
unplug power cord, and allow unit to cool before
performing any cleaning, adjustments, or maintenance.
WARNING
11
Form No. HBGm-1111
TROUBLESHOOTING GUIDE
Содержание HBG-2418
Страница 15: ...15 Form No HBGm 1111 NOTES...
