Hatco Glo-Ray GRPWS Series, Инструкция по установке и эксплуатации

Страница: 11 / 32

Form No. GRPWSM-0719
11
English
OPERATION
General
Use the following procedures to operate a Glo-Ray Pizza
Warmer.
WARNING
Read all safety messages in the IMPORTANT SAFETY
INFORMATION section before operating this equipment.
Do not place food product directly onto hardcoat surface.
Food product must be wrapped, boxed, or on a food pan.
Startup
1. Plug the unit into a properly grounded electrical receptacle
of the correct voltage, size, and plug configuration. See
the SPECIFICATIONS section for details.
2. Turn on the desired number of shelves, depending on the
unit. For each shelf:
a. Move the Power On/Off switch to the “On” position. The
overhead lights will turn on and the heated shelf will
energize.
NOTE: The Power On/Off switch must be in the “On” position
for the corresponding heated shelf to function.
CAUTION
BURN HAZARD: Some exterior surfaces on unit will get
hot. Use caution when touching these areas.
b. Turn the Temperature Control knob to the desired
temperature setting for the heated shelf. Turning the
Temperature Control knob clockwise will increase the
temperature setting. Turning the Temperature Control
knob counterclockwise will decrease the temperature
setting.
3. Allow the unit 30 minutes to reach operating temperature
before placing preheated food product.
Shutdown
1. Move the Power On/Off switch(es) to the “Off” position.
The overhead lights and heated shelf/shelves will shut off.
GRPWS Controls (GRPWS-xxxxD control panel shown)