Hatco DL-400, Инструкция по установке и эксплуатации

Страница: 14 / 20

GENERAL
The Hatco Decorative Heat Lamps are designed
for maximum durability and performance,
with minimum maintenance.
CLEANING
To preserve the finish of the Decorative Heat Lamps
it is recommended that the lamp shade surface be
wiped daily with a soft damp cloth. Stubborn stains
can be removed with a mild non-abrasive cleaner.
WARNING
To avoid electrical shock or personal injury, do
not steam clean or use excessive water on the
unit.
WARNING
To avoid any injury or damage to the Decorative
Heat Lamps turn the power OFF at the
disconnect switch/circuit breaker and allow to
cool before performing any maintenance.
NOTICE
Use only non-abrasive cleaners. Abrasive
cleaners could scratch the finish of your
Decorative Heat Lamp, marring its appearance
and making it susceptible to dirt accumulation.
HEAT BULB REPLACEMENT
Each standard wattage Decorative Heat Lamp (DL)
holds one infrared heat bulb rated at 250 watts.
Each high wattage Decorative Heat Lamp (DLH)
holds one clear, uncoated infrared heat bulb rated at
375 watts. 250 watt bulbs may also be used in DLH
units.
WARNING
For safe and proper operation, do not install a
375 watt bulb into a DL standard watt lamp.
1. To replace a bulb, place the switch in the OFF
position and allow the bulb to cool completely.
2. Bulbs have a threaded base. Unscrew the heat
bulb counter clockwise from the unit and replace
with a new bulb.
The following replacement bulbs are available from
the factory or Hatco Authorized Parts Distributor.
DL (standard wattage)
250 Watt 120V Red Coated
02.30.068.00
250 Watt 120V Clear Coated 02.30.069.00
250 Watt 120V Red Uncoated 02.30.070.00
250 Watt 120V Clear Uncoated 02.30.071.00
250 Watt 240V Clear Uncoated 02.30.083.00
DLH (high wattage)
375 Watt 120V Clear Uncoated
02.30.093.00
375 Watt 120V Red Uncoated 02.30.094.00
375 Watt 120V Clear Coated 02.30.097.00
375 Watt 120V Red Coated 02.30.098.00
WARNING
If service is required on this unit, contact your
Authorized Hatco Service Agent, or contact the
Hatco Service Department at 800-558-0607 or
414-671-6350; fax 800-690-2966, or International
fax 414-671-3976.
WARNING
This product has no “user” serviceable parts. To
avoid damage to the unit or injury to personnel,
use only Authorized Hatco Service Agents and
Genuine Hatco Replacement Parts when service
is required.
WARNING
Genuine Hatco Replacement Parts are specified
to operate safely in the environments in which
they are used. Some aftermarket or generic
replacement parts do not have the
characteristics that will allow them to operate
safely in Hatco equipment. It is essential to use
Hatco Replacement Parts when repairing Hatco
equipment. Failure to use Hatco Replacement
Parts may subject operators of the equipment to
hazardous electrical voltage, resulting in
electrical shock or burn.
Form No. DHLM-1207
12
MAINTENANCE