Changing the focusing screen 45, 46
1. Detach the magazine and viewfinder.
2. Push the two screen clips to the side into their
recesses.
3. Place your hand over the screen, and invert
the camera. The screen will now drop into
your hand.
4. Insert the replacement screen, ensuring that
the smooth flat side is uppermost and the
sharp-edged corners down. Ensure that all
four corners of the screen are positively seat-
ed on their supports.
You need not return the screen latches. This is
done automatically when the viewfinder is re-
placed.
Should the screen refuse to drop out by itself,
ensure that the camera is fully wound, remove
the lens and check that the mirror is in the
down position. Put a finger through the lens
mount and push gently on the screen from un-
derneath, preferably with a soft cloth between
the screen and the finger.
!
Do not immerse the screen in water, or use any
kind of cleaning fluid.
!
Do not use hot air to dry the screen if it becomes
damp.
Winding crank (503CW only) 47, 48
The winding crank on the 503CW can be re-
moved. Push the catch lever downwards while
rotating the crank counter-clockwise and pull
the crank straight out from the shaft. To at-
tach it, align the small triangular index mark
against the red dot on the camera body. Keep
the crank pushed against the camera while
turning it clockwise until the larger triangular
mark is aligned with the red dot where it will
click into position.
Accessories
All accessories included in the present
Hasselblad Product Catalog can be used
with the 500 series cameras (when not spe-
cifically noted otherwise), except the FE-type
lenses. As these cameras are further devel-
opment of previous models, they feature
certain improvements and differences in
construction. This means that certain older
and now discontinued accessories cannot
be used and any forced attempt at mount-
ing them may damage your equipment, so
please check carefully before trying.
Figure 63 shows the wide range of accesso-
ries presently available within the Hasselblad
System for the 501CM and 503CW cam-
eras. Please refer to the Hasselblad Product
Catalogue, available from your Hasselblad
dealer, for complete and up to date infor-
mation, or visit our website - www.hassel-
blad.com.
16