Hasler HJ500P, Руководство по эксплуатации, Страница: 25 / 40

Section 3 – Operating The HJ500P HJ500P
Hasler
®, Inc. 04/2004 Page-17
Using Barcodes with DeskTop Mailer
®
Edit Form
It is necessary to set up the layout form to match the HJ printer that you are using. The steps below will help you
to accomplish this:
1. Click on Print , then in this example Non-presorted Labels and then Page/Form Setup...
2. When the “ Select Form” window opens click on Edit .
3. The “Edit Form” window will open.
4. Fill in the information as follows:
a. Labels Across Page = 1
b. Width of label = any number up to the
maximum print length of the printer you are
using.
c. Form Left & Right Margins= depends
on the size of the form and the width of the
printing area required.
d. Width between labels = 0.
e. Form Width = the length of the piece
you are printing on.
f. Labels down page = 1
g. Height of label = is equal to the number
of printheads the model of HJ Printer you
are using times 1/2-inch. In our example
we are using a 5-head printer, therefore the height is 2-1/2 inches.
h. Form Top & Bottom Margins = should be set at 0.100 to insure that none of the data is lost.
i. Height between labels = 0.000
j. Form Height = the height of the printhead area or slightly larger.
5.
Name the form in the Form name box and click OK.
Create Layout
Once the Barcode font supplied with the HJ
Driver Disk is installed on your computer and the
form is setup, the layout that you are using in
DeskTop Mailer® must be created.
1. Open the DeskTop Mailer
®
application
and then open the Data file.
2.
Click on Print and open the Template
Design . (In the example we are using
Non-presorted Labels. This same step
holds true for Presorted Labels)