HARVEY HPS1600E, Оригинальное руководство пользователя

Страница: 21 / 62

- 20 -
a, The sliding table is very heavy, you must moving it as
Fig.12
.
b, Fit the sliding table to main base, mount it to aluminium block (E), as
Fig.13, Fig.14
Fig.12 Fig.13
there are three aluminium blocks at the front of the main base, don’t adjust it or
take-down.
The sliding table must be parallel to the main blade. Set the blade to its max.
height and cut a test piece (MDF or other similar materials) with sliding table. If the cut
quality is not satisfactory, you can adjust sliding table parallelism to main blade:
c, adjust sliding table parallelism to main blade
Loosen (C) bolts between sliding table and cabinet tiny, see
Fig.14
Adjust two adjustment bolts A and B - both sides, see Fig.15, Bolt B can pull sliding table;
bolt A pushes sliding table during adjustment.
When parallelism is OK, lock A and B, then tighten (C) Bolts. see
Fig.15
.
Fig.14 Fig.15
d.
insert the 4pin connector (F) to the socket of the main base, as
Fig.16
Fig.16