HARVEY GYRO AIR G700, Руководство по эксплуатации

Страница: 7 / 30

7
3. Safety Regulations
3.1 General Safety Instructions
1. Read and understand the owner’s manual and labels affixed to the machine. Learn its
application and limitations as well as its specific potential hazards.
2. The power supply socket or terminals need reliable grounding.
3. Keep in good working order, properly adjusted and aligned. Cluttered areas and benches invite
accidents. Make sure the floor is clean and not slippery due to wax and sawdust build-up.
4. WARNING ! – To reduce the risk of electric shock:
Do not expose the machine to water or moisture.
Do not use outdoors.
5. Do not use this machine within the designated safety areas of flammable liquid stores or in
areas where there may be volatile gases. Keep work area clean, dry, and well-lighted.
6. Keep children from reaching this machine.
7. Don’t force the machine or the attachment to do a job for which it was not designed.
8. Do not wear loose clothing, gloves, neckties or jewelry (rings, watch) because they could get
caught in moving parts. Non-slip footwear is recommended. Wear protective hair covering to
contain long hair. Roll up long sleeves above the elbows.
9. Do not use this machine if you are tired, your attention is wandering or you are being subjected
to distraction.
10. If the work operation appears to be excessively noisy, wear ear protection.
11. Always wear safety glasses or a face shield when operating or observing machinery to reduce
the risk of eye injury or blindness from flying particles. Everyday eyeglasses are not approved
safety glasses.
12. WARNING ! – To reduce the risk of electric shock:
Always unplug the machine during servicing.
13. WARNING ! – To reduce the risk of injury from moving parts :
Always unplug before servicing.
14. Make sure the power switch is on the “OFF” position before plugging in.
15. Turn power ‘’OFF’’. Don’t leave until it comes to a complete stop.
16. Regularly inspect machine for damaged parts, loose bolts or any other conditions that may
affect safe operation. Always repair or replace damaged parts before operating machine.
17. Keep the machine clean; it will enable you to more easily see any damage that may have
occurred. Clean the machine with a damp soapy cloth if needs be, do not use any solvents or
cleaners, as these may cause damage to any plastic parts or to the electrical components.