11
Baler Monitor Setup / View
– UHD Baler Only
Current Moisture
Preservative Applicator Target Rate
Average Moisture
Preservative Applicator Actual Rate
Moisture System On. The icon will flash when the system is paused
Moisture System Off
Tagger Installed and On. This icon will flash when a tag is applied. There is also a % symbol
that shows in the top right corner if the bale moisture goes over the limit
Background turns red when your system
is on main work screen. Icon Blinks
when the system is paused.
This container is reserved for the
moistures system. It shows the tagger
status and applicator status. When
moisture is above your setpoint it will turn
the background red and show the
percent moisture icon in the upper right
corner.
These four containers can be configured by the
operator. In the selectable list are the items for
your system. They are Current moisture,
average moisture, applicator target rate, and
applicator actual rate. When moisture is above
your alarm setpoint it will show the moisture
value with a red background.