T
+44 (0)1709 377172
F
+44 (0)1709 377173
E
www.harvesthealthcare.co.uk
10
11
Tighten up the clamping lever until the clamping brackets come into contact with
the sleeping platform. Ensure the clamping brackets are in contact with the sleeping
platform and not any of the mattress platform fi xings.
Tighten the clamping levers ensuring that the grab handle is securely attached to the
bed frame.
Pull the clamping levers down and turn them so the levers are safely hidden under the
bed.
4
5
6
Check the grab handle is securely fi xed and operate the side rails to ensure there is
no confl ict between the two.
Harvest Healthcare Ltd recommends the grab handle and clamping levers are
regularly checked for security.
7
8
INSTALLATION
ULTIMATE GRAB HANDLE
INSTALLATION
ULTIMATE GRAB HANDLE
FITTING THE ULTIMATE GRAB HANDLE
1
2
3
Lock any side rails in the upper position.
Ensure that the clamping levers are loosened off and the clamping brackets are at the
lowest position.
Fit the bed to the side of the sleeping platform (on the inside of the side rails if fi tted)
ensuring that it is either less than 60mm from the headboard or more than 318mm
from the headboard.
The following instrutions show how to fi t the
HLB686
grab handle to a
Woburn Ultimate
Bed only.
Please pay attention to the sleeping platform fi xings as the grab handle will not fi t
over these fi xings. Do not fi t the grab handle adjacent to the mattress guides.
Gap must be:
Less than 60mm
Greater than 318mm