T
+44 (0)1709 377172
F
+44 (0)1709 377173
E
www.harvesthealthcare.co.uk
8
9
FITTING THE GRAB HANDLE TO A BED OTHER THAN WOBURN
1
2
Carry out a risk assessment to ensure the two
products are compatible.
The black spacers can be removed to allow the grab
handle to fi t on beds with platform tubes larger than
the Harvest Healthcare Ltd range of beds.
Lock any side rails in the upper position.
Ensure that the clamping levers are loosened off and the
clamping brackets are at the lowest position.
Fit the grab handle to the side of the sleeping platform (on the
inside of the side rails if fi tted) ensuring that it is either less than
60mm from the headboard or more than 318mm from the
headboard.
3
4
5
Please pay attention to the sleeping platform fi xings as the grab handle will not
fi t over these fi xings. Do not fi t the grab handle adjacent to the mattress guides.
Gap must be:
Less than 60mm
Greater than 318mm
Tighten up the clamping lever until the clamping brackets come into contact with
the sleeping platform. Ensure the clamping brackets are in contact with the sleeping
platform and not any of the mattress platform fi xings.
Tighten the clamping levers ensuring that the grab handle is securely attached to the
bed frame.
Pull the clamping levers down and turn them so the levers are safely hidden under the
bed.
6
7
8
Check the grab handle is securely fi xed and operate the side rails to ensure there is
no confl ict between the two.
Harvest Healthcare Ltd recommends the grab handle and clamping levers are
regularly checked for security.
9
10
INSTALLATION
GRAB HANDLE
INSTALLATION
GRAB HANDLE