T
+44 (0)1709 377172
F
+44 (0)1709 377173
E
www.harvesthealthcare.co.uk
2
3
READ THIS INSTRUCTION MANUAL CAREFULLY. PLEASE NOTE
IN PARTICULAR THAT THE SAFETY INSTRUCTIONS MUST BE
OBSERVED.
WARNING
Failure to fit the grab handle in the correct position may cause a risk of entrapment.
If the grab handle is used on a bed with integral side rails beware of a potential pinch point between
the grab handle and side rails.
The grab handle should either be positioned less than 60mm from the headboard or more than
318mm from the headboard.
The grab handle and its fixings must be regularly checked for security.
Before installing the grab handle Harvest Healthcare Ltd recommends carrying out a risk
assessment to ascertain if the grab handle is suitable for the person in the bed and the compatibility
of the grab handle to a bed manufactured by anyone other than Harvest Healthcare Ltd.
WARNINGS &
CAUTIONS
CONTENTS
CAUTION
Ensure the grab handle is suitable for the bed it is being fitted to.
Ensure the grab handle is located in a correct position.
Ensure the securing clamps are tight and are checked at regular intervals
Do not allow the grab handle to cause an increased risk to the patient.
It is important that an individual risk assessment is performed for each user on a case by case
basis. This is required to assess both the suitability of the grab handle for a particular client and the
compatibility between the grab handle and the bed it is being fitted to.
Care must be taken with rising backrests, as the gap between the two components could become
less than 25mm in certain situations.
If you are have any doubt about the suitability or fitting of the grab handle contact
Harvest Healthcare Ltd.
WARNINGS & CAUTIONS
OVERVIEW - GRAB HANDLE
OVERVIEW ULTIMATE GRAB HANDLE
FITTING THE GRAB HANDLE TO A WOBURN BED
FITTING THE GRAB HANDLE TO A NON-WOBURN BED
FITTING THE ULTIMATE GRAB HANDLE
SPARE PARTS LIST BACK PAGE
3
4
5
6-7
8-9
10-11
BACK COVER