Hartmann Thermoval baby, Инструкция по эксплуатации

Страница: 20 / 96

19
English
EN
Press the SCAN button briefly to retrieve the last measured
value. The number ‘1’ will appear on the display, together with
the memory icon ‘M’. Then the stored temperature reading is
displayed.
To display the next 9 values, press the SCAN button repeatedly.
If you press the SCAN button again after having retrieved
the 10 temperature readings, this sequence will restart,
commencing with the measured value number 1.
10. Explanation of error messages
Thermoval baby is a clinically tested, premium product. Yet error messages may
occur, such as an ambient temperature reading that is too high or too low, if the
measured temperature is outside the range of human body temperature, if the
battery is flat or in very rare instances, if a system error occurs.
Error message Possible causes Remedy
Device cannot
be switched on
Batteries are missing,
incorrectly inserted or
low/empty.
Check batteries and insert
two identical new batteries if
necessary.
Temperature above
42.2 °C, measured
in forehead mode
Check that the mode switch is in
the correct position.
Only use the thermometer within
the stated measurement range
(see Chapter 14).
Temperature below
34.0 °C, measured
in forehead mode