HAVE A QUESTION? CALL THE HART HELP DESK at 800-252-2818, or EMAIL US AT [email protected]
SET UP ACCESS POINT
SET UP ACCESS POINT
WiFi Connectivity Overview
The Hart Systems NexGen Inventory System provides instant
communications at the end of each item. The Internet reports are
updated in real-time.
Each location was provided two Access Points. One Access Point
should provide sufficient coverage for Inventory. The other access
point can be used as a back-up unit.
If you use both Access Points,
please keep them at least 150 feet apart from each other
.
VERY IMPORTANT!!!
1.
For optimum range, place the Access Point in the the middle
of the store and as high as reasonably possible.
2.
Try to avoid any known areas with difficult cell coverage.
3.
In the event that the location has no cell coverage, please call
the Hart Help Desk for further instructions.
The CradlePoint routers (
“Access
Points”
) can be connected
anywhere in the facility with an accessible power outlet.
To set-up the Access Point:
1.
Clear a flat surface area with access to a power outlet.
2.
Place the following items in the area:
♦
Access Point.
♦
USB Air Cards
3.
Connect the power adapter for the
Access Point
into the port on
the back and then plug into an available outlet.
4. Insert the USB Aircard
into the USB port in the back of the
Access Point.
♦
You received
TWO (2) USB Aircard types
for the main
Access Point - one for Verizon and one for AT&T; you should
use the Aircard for the respective carrier that has the best
coverage in your area.
Page - 3
