1: The back stanchion is not required. Remove
from upright and base if you have standard
volleyball set and required to add the self
weighted frame. If you have purchased VOL-034
refer to steps 1 & 2 on page 3 for setting up posts.
BOL300
X2
BOL712 X4
BOL202 X2
CAP950 X4
FEP030
FEP030
2: Assemble the self weighted support frame by aligning
the 2 bolt holes up and inserting BOL300 & BOL712.
Then Secure into place with BOL712 and BOL202. Once you
have done that place CAP950 over BOL202 & BOL300.
CAP950 x1
BOL337 x1
BOL712 x1
3: Gently Remove the caps from the base.
4: Sit the frame onto the base as shown right,
so that the square headed bolt is in the bolt
hole of the brace.
5: Using the bolts from the fittings pack
secure the rest of the into place. Once all
tightened up add the nut cap & tap in the
caps into the base to finish off.
Remove
the cap
from ends
BOL709 x1
BOL202 x1
PAGE 5
Code:
Product:
Code:
Product:
Code:
Product:
Code:
Product:
SITTING VOLLEYBALL POST (BOLT DOWN OR SELF WEIGHTED)
VOL-033 & 034
Harrod UK Limited
©
©
©
©
VOL-034 - Self Weighted Version Only
