2: Unscrew the bolts from the back of either FEP206 or FEP207
then slide one FEP241 to the upright & locate on the square
head bolts in the upright. Fasten into place with the washer
and nylock. Place a nut cap over the nylock on done.
3: Note: for Self Weighted post, jump straight to page 4.
Slide the square headed bolt and the aluminium
square space along the channel. Connect the
back stay to square headed bolt and the bolt on
the back of the base, tighten up into place using
nylock nut and place nut cap on to finish off.
5: Screw the T-bolt in the nuts
on the top of the base when
not in use.
4: Repeat the above process for the other
upright post & base
6: Place the uprights on the court where required
and bolt down into place using the t-bolts,
either the back two bolt holes or the single
single central hole.
PAGE 4
Code:
Product:
Code:
Product:
Code:
Product:
Code:
Product:
SITTING VOLLEYBALL POST (BOLT DOWN OR SELF WEIGHTED)
VOL-033 & 034
Harrod UK Limited
©
