Code
Product
HOC-240
Freestanding Hockey 5s Surround
Assembly Instructions
Page 2
2
Remove the two bottom joint connector
from the front of the goal sideframe, retain
these bolts for re-use after boards are removed. Attach the Goal Bracket (4) to the goal using
two M6 Button Screws (7), two M6 Washers (8), and two joint connector
(previously
bolts
nuts
7
4
Joint Connector
Nut
Goal
4mm
1
Attach a Joining Plate (2) to a Rebound Board (1) using two Hand Wheels (5) and two Ball
Knobs (6). Ensure the Balls and Knobs face towards the inside of the board, do not fully tighten
Handwheels to side of board. Repeat for 74 boards.
5
6
1
2
8
IMPORTANT:
Steps 2 & 3 refer to installation with Harrod UK Ltd
models HOC-150 to HOC-170 only, skip to step 3a for installation
instructions for other goals.
i
8
IMPORTANT:
Retain joint connector bolts for re-use after boards
are removed
i
