DECORATIVE FRUIT CAGE ASSEMBLY INSTRUCTIONS
PAGE 3
HEAVY-DUTY STEEL DOOR KIT
PARTS IDENTIFICATION (GDN105)
Ref No.
Part Description
Part No.
1.
2 x 0.7m Horizontal Supports
PGG117
2.
1 x Diagonal Support
PGG007
3.
2 x 1.9m Vertical Supports
PGG006
4.
1 x 2.3m Door Support Upright
PGG112
DECORATIVE FRUIT CAGE
PARTS IDENTIFICATION (GFC - 128/129)
Ref No.
Part Description
Part No.
14.
2.5m Horizontal Support
PGG035
15.
Three-Way Connector
GDN-675
16.
Four-Way Connector
GDN-679
17.
Five-Way Connector
GDN-678
18.
Square Connector Plate
PGG016
19.
Long Connector Plate
PGG021
20.
Corner Connector Plate
PGG019
21.
Connection Node
PGG008
22.
Hex Bolt M10 x 20mm
BOL342
23.
M10 Washer
BOL712
24.
Curved Roof Support
PGG011
25.
Ground Peg
GPP001
26.
Net Clip
GPP005
27.
Net Tie
GAR914
4.
2.3m Support Upright
PGG112
NA
2m Wide Standard Side Netting
GAR070
NA
Fitted Roof Net
GDN-072
NA
Whipping Twine
TWN-294
NA
Whipping Needle
TWN-295
Introduction
Thank you very much for purchasing this Harrod Horticultural Decorative Fruit Cage.
These instructions show the step by step assembly of a three unit cage which will help
demonstrate how to install your fruit cage, regardless of whether you have bought a
single, or a multiple unit cage.
Safety
To install your cage safely we recommend that you enlist the help of three or more people. Take extra
care when working on step ladders on soft ground.
Tools Required:
1 x soft mallet, 1 x 8mm spanner, 2 x 13mm spanners, 1 x 17mm spanner, 1 x tape measure,
1 x scissors,1 x ball of string, 1 x spirit level, 1 x hole former (ARC-021)
(Optional).
Parts Identifcation
Before constructing the fruit cage remove all protective packaging and check that all parts listed in
the pack contents list (CHK-809) are present. Use the part identifcation diagram on the opposite
page to help you recognise the parts. You will have varying quantities of fruit cage parts depending
on the number of units combined to make up your specifc arrangement. Each door kit, of which you
will have at least one, comprises of the parts listed in the table below left.
STEEL DOOR ASSEMBLY PACK
PARTS IDENTIFICATION (GDN116)
Ref No.
Part Description
Part No.
5.
4 x Two-Way Connector
GDN-676
6.
1 x T-Joint
PGG005
7.
1 x Catch and Fixings
GDN-809
8.
2 x Hinge and Fixings
GDN-808
9.
2 x Hex Bolts M8 x 45mm
GPP510
10.
4 x Plastic Washers M8
GPP710
11.
2 x Nylock Nuts M8
GPP500
12.
1 x Foot Plate Clamp
GDN-108
13.
1 x Foot Plate
GDN-108
Note:
A 3mm allen key is provided
with GDN-809 for assembly of GDN-809
and GDN-808
