HARRISTON INDUSTRIES 93066, Руководство оператора

Страница: 50 / 92

45
4.10 Machine Settings
During the machine inspection that the operator should do at the start of each working day, it is his
responsibility to check each machine setting to ensure that they are appropriately set for the operating
conditions. The following adjustments should be checked:
4.10.1 Gauge Wheels
Each row is equipped
with a set of gauge
wheels to control planting
depth. The two gauge
wheels carry part of the
weight of the planting
shoe as the machine
moves through the field.
All irregular seedbed
conditions are evened out
by the wheels. A variety of
holes are provided to
adjust gauge wheels.
The height of the gauge wheels are set by the adjusting
cranks on the front of the row unit frame. Turn clockwise to
raise and counter-clockwise to lower. Repeat with other
gauge wheel assemblies. Always operate all gauge wheels
at the same depth.
The gauge wheels are also adjustable on the gauge wheel
itself. Adjust here as needed, to avoid having adjusting
cranks to low.
**Failure to adjust the gauge wheel side plates for
large depth changes can result in bending the depth
screw or other depth control components**