HARRISTON INDUSTRIES 93066, Руководство оператора

Страница: 46 / 92

41
Troubleshooting Continued
Notice the bullets that have red outlining them;
this indicates where the problem would be.
➢
Granular PPU refers to the motor pick
up of that would run the granular part of
the planter. Check to see if motor
harness is plugged into C13 of the main
harness.
➢
Row Unit PPU refers to the motor pick
up that would run the row units on the
planter. Check to see if the motor
harness is plugged into C9 of the main
harness. This alarm can also be triggered
if there is no hydraulic flow.
➢
Fertilizer PPU refers to the motor pick
up that would run the fertilizer part of
the planter. Check to see if the motor
harness is plugged into C11 of the main
harness.
➢
A & B Controller Can refers to the 2
gray controllers located in the middle of
the planter in the back. The larger of the
2 controllers plugs into C3 of the main
harness and the smaller has C1 & C2 of
the main harness plugged into it. If you
have a 4 row planter C1 will be the only
connection plugged into the smaller
controller. Check to make sure this
connection is connected.
➢
Fertilizer Calibration, follow steps
outlined on page 37.
➢
Granular Calibration, follow steps
outlined on page 37.
➢
Row 1 Feed refers to the C7 connection
from the harness to the feed box coil on
row one. Check to make sure motor is
not jammed or that a rock or stick has
not jammed feed chain. Also check the
C7 plug for any damage.
➢
Row 2 Feed refers to the C6 connection
from the harness to the feed box coil on
row 2. Check to make sure motor is not
jammed or that a rock or stick has not
jammed feed chain. Also check the C6
plug for any damage.
➢
Row 3 Feed refers to the C5 connection
from the harness to the feed box coil on
row 3. Check to make sure motor is not
jammed or that a rock or stick has not
jammed feed chain. Also check the C5
plug for any damage.
➢
Row 4 Feed refers to the C4 connection
from the harness to the feed box coil on
row 4. Check to make sure motor is not
jammed or that a rock or stick has not
jammed feed chain. Also check the C4
plug for any damage.
➢
Row 5 Feed refers to the C41 connection
from the harness to the feed box coil on
row 5. Check to make sure motor is not
jammed or that a rock or stick has not
jammed feed chain. Also check the C41
plug for any damage.
➢
Row 6 Feed refers to the C42 connection
from the harness to the feed box coil on
row 6. Check to make sure motor is not
jammed or that a rock or stick has not
jammed feed chain. Also check the C42
plug for any damage.
➢
Row 7 Feed refers to the C43 connection
from the harness to the feed box coil on
row 7. Check to make sure motor is not
jammed or that a rock or stick has not
jammed feed chain. Also check the C43
plug for any damage.
➢
Row 8 Feed refers to the C44 connection
from the harness to the feed box coil on
row 8. Check to make sure motor is not
jammed or that a rock or stick has not
jammed feed chain. Also check the C44
plug for any damage.
➢
Granular Drive refers to the C12
connection from the harness to the PWM
valve that controls the granular motor.
Inspect plug for damage.
➢
Row Unit Drive refers to the C8
connection from the harness to the PWM
valve that controls the row unit drive
motor. Inspect plug for damage.
➢
Fertilizer Drive refers to the C10
connection from the harness to the PWM
valve that controls the fertilizer motor.
Inspect plug for damage
➢
Shaker Drive refers to the C46
connection from the harness to the PWM
valve that controls the shaker motor.
Inspect plug for damage.