Harris Nexio G8, Руководство по оборудованию, Страница: 46 / 76

44 Chapter 2 | Installation and Setup
G 8 H a r d w a r e I n s ta l l a t i o n M a n u a l
Copyright © 2014 Harris Broadcast
Proprietary and Confidential
BIOS Error Beep Codes
During the POST (Power-On Self-Test) routines, which are performed each time the system is powered on,
errors may occur.
Non-Fatal and
Fatal Errors
Non-fatal errors are those which, in most cases, allow the system to continue
the boot-up process. The error messages normally appear on the screen.
Fatal errors are those which will not allow the system to continue the boot-up
procedure. If a fatal error occurs, you should consult with your system
manufacturer for possible repairs.
These fatal errors are usually communicated through a series of audible beeps.
The numbers on the fatal error list correspond to the number of beeps for the
corresponding error. All errors listed, with the exception of Beep Code 8, are
fatal errors.
Table 2-1. BIOS Error Beep Codes
Beep Code Error Message Description
1 beep Refresh Circuits have been reset (Ready to
power up)
5 short beeps and
1 long beep Memory error No memory detected in the system
5 beeps No Con-In or
Conout devices Con-In includes USB or PS/2
keyboard, PCi or Serial console
redirection, IPMI KVM or SOL.
Con-Out includes video controller,
PCI or Serial console redirection or
IPMI SOL.
1 Continuous
beep System OH System Overheat